release – Page 7 – Powercode

Release 18.06.25 [Beta]

Bug Fixes

Overage services didn’t always update new values properly, this has been fixed.
Missing config values no longer prevent customers from adding Credit Cards in the Customer Portal.
A case where graphs would fail to record SNMP data has been fixed.
Twilio Opt-In from the Customer Portal will now toggle correctly.

Miscellaneous

Added internal subnet validation when saving.
ISP Description is no longer a required field when adding a service.
Non-default tabs were showing on page load for services, these are now hidden.

By Hayden Schuch|2018-06-25T15:34:24-05:002018 June 25th|Changelog|Comments Off

Release 18.06.21 [Beta]

New Features

New redesigned Add / Edit BMU page.
Preseem BMU – added the ability to add Preseem as a BMU.

Bug Fixes

Various fixes to graphing including certain probes not graphing, BMU throughput not graphing properly, and graphs missing chunks of data.
Services will no longer fail to delete if FCC data is attached to it.
Validation errors when saving a service will now display an alert only once.

Miscellaneous

Added missing datepicker selector to the account and account class reports.
Added preseem bandwidth gathering endpoint to the API.
Added an internal email event trigger when a customer status changes.
Customer files now sort by filename as default.
Updated several alignment aspects on the BMU Statistics page.
Updated Saisei to show the correct version string.
Updated Saisei Application list.

By Hayden Schuch|2018-06-21T14:41:07-05:002018 June 21st|Changelog|Comments Off

18.06.15 Release [Beta]

System Changes

Late Fee – you can now specify a specific number of days after a bill is due to apply a Late Fee (X Days After Due).
Customer Portal Balance – customer portal now warns when overpaying on the account balance instead of the amount due.

Features

Created new cnMaestro page for Access Point data.
Created new cnMaestro page for Subscriber Module data.
Redesigned the Add / Update Services page.

Miscellaneous

Fixed description wrapping off-screen in the transaction log list.
Fixed an issue where equipment that wasn’t rate limited would block anything else from being limited.
Search now retains search results when a session expires through the Staff Portal.
Fixed an issue with saving contact information, specifically passwords.
Network Site files will now delete fully.
Fixed an issue where changing a customer to archived status from a Scheduled Event would fail to fully archive the customer.
Customers will now be redirected to a Success page when completing a payment in the Customer Portal.
Fixed an issue where timestamps would generate incorrectly in the Customer Portal.
Updated procera data types to prevent issues with syncing service data.
Saisei assured and restricted settings now save properly.
Fixed network sites View on Map link to function properly.
Event logs for address changes no longer improperly label latitude as longitude.
Device reboot button no longer shows if a cnMaestro device is in bad status.
Fixed issues with loading correct census blocks for the FCC 477 report.
CustomerID no longer opens transaction history in the Account Class report.

By Hayden Schuch|2018-06-20T16:20:24-05:002018 June 15th|Changelog|Comments Off

Release 18.05.29 [Beta]

Bug Fixes

Fixed a case where cnMaestro would fail to connect to its API.
cnMaestro event logs now display in the correct order.
Fixed cnMaestro link contrast on good-status equipment on the Customer Overview.
Fixed an issue where FCC Form 477 would fail to correctly obtain new FIPS information.
cnMaestro no longer tries to fetch all clients when loading a specific device information.

Miscellaneous

Added ability to reboot a device through cnMaestro.
Re-skinned Customer Balance Detail report.

By Hayden Schuch|2018-06-20T16:21:02-05:002018 May 29th|Changelog|Comments Off

Release 18.05.28 [Stable]

Bug Fixes

You can add tickets on the Customer Overview again.
Fixed an issue checking if a customer is on a Saisei BMU.
Call log contents no longer stretch past its container.
Fixed a case where accounts would falsely activate as if they were a new account.
Saisei usage graph now works when there is no usage on the account.

NOTE: This release does not include items from the 18.05.24 BETA. If you would like to retain these features, please upgrade to the subsequent 18.05.29 BETA.

By Hayden Schuch|2018-06-20T16:21:11-05:002018 May 28th|Changelog|Comments Off

18.05.24 Release [Beta]

New Features

cnMaestro Integration – adds the ability to integrate cnMaestro with Powercode.
Fetches device and client data and displays data in the cnMaestro page.
SubscriberWise Integration – allows you to perform soft credit checks on customers in the Add Customer Wizard.

Bug Fixes

Fixed a display issue with unselectable services.
MikroTik no longer floods the logs with version spam.
Fixed missing Allow / Deny mode option for MikroTik BMUs.
Fixed a redirect issue when resetting a password through the Customer Portal.

Miscellaneous

Added the ability to create custom policies for Saisei and add those policies to a Service.
Added a webhook for when a customer deletes a credit card.

By Hayden Schuch|2018-06-20T16:21:28-05:002018 May 24th|Changelog|Comments Off

18.05.23 Release [Stable]

This stable release is the first stable release since 18.03.21. Some of the highlights include:

NEW Customer Portal complete with bugfixes and many new features!
Service Areas – you can now specify which service areas you cover, including support for International customers!
Saisei BMU Integration – fully integrate the power of the Saisei BMU into your network within Powercode.
FCC Monthly Backups & Sticky Settings – you can now specify FCC 477 export settings on a per-service basis, and Powercode now automatically saves your FCC data every month!
Twilio Dashboard – you can now send out SMS messages, view replies, and see metrics for your Twilio usage from the Twilio Dashboard in Reports.
Over 50 system changes and enhancements to make Powercode work better.

Be sure to check out everything that’s been added! In addition to these couple changes:

Bug Fixes

Fixed bandwidth gathering from not initializing properly for Saisei.
Editing non-monthly internet services now correctly loads FCC sticky settings.
System event log for schedule overrides no longer inaccurately sets the user as admin.
Customer portal mobile menu now has the correct background.
Twilio logs link in the Twilio configuration page now links to the correct location.
Fixed an issue where internal ranges were being applied to every BMU regardless of type.
Fixed several issues with VoIP service comparisons.
You can now override service costs to $0 again.
Fixed an issue preventing BMUs from being added.

By Hayden Schuch|2018-06-20T16:21:43-05:002018 May 23rd|Changelog|Comments Off

18.05.16 Release [Beta]

New Features

Twilio Dashboard – you can now send out SMS messages, view replies, and see metrics for your Twilio usage from the Twilio Dashboard in Reports.

Bug Fixes

Fixed an issue with BMU status checks failing.
Saisei minute by minute graphs will now load correctly.
Customer usage report now only shows customers in the WebUser’s viewable customer groups.

By Hayden Schuch|2018-06-20T16:21:53-05:002018 May 16th|Changelog|Comments Off

18.05.15 Release [Beta]

New Features

FCC Monthly Backups & Sticky Settings – the FCC report will now run and backup report data to Powercode. Additionally, you can now specify FCC report settings on a per-service basis that will automatically populate when generating an FCC 477 report.

Bug Fixes

Re-added missing ticket template selection to Tickets on the Customer Overview.
Fixed an issue with the complete map popup showing in the incorrect location when zooming.
Duplicate Network Sites no longer load in Mass Notification.
Fixed a case where some customers would not re-activate when making a full payment through the Customer Portal.
Customer usage graphs now load based on billing settings and not by month.
Service speeds are no longer inverted on the Service Items list.

Miscellaneous

Added filterable Ticket ID column to the Ticketing Dashboard.
Saisei will now automatically sync Powercode’s application list.
Added ability to manage subnets marked explicitly as ‘Internal’ in Powercode for Saisei.

By Hayden Schuch|2018-05-15T16:08:46-05:002018 May 15th|Changelog|Comments Off

18.05.14 Release [Beta]

Bug Fixes

Addresses with long GPS coordinates will no longer fail to generate in the FCC 477 report.
Fixed adding phone numbers in the Add Customer Wizard.

Miscellaneous

Added configuration for sending SMS reminders for next-day jobs.

By Hayden Schuch|2018-05-15T15:04:14-05:002018 May 14th|Changelog|Comments Off