beta

Release 18.09.27 [Beta]

Customer

  • Resolved several old account references in the previous Beta that were preventing Status changes and the addition of new Customer Accounts.

Upgrades

  • Upgrades will no longer show patch versions that are incompatible with the current Powercode version.

Ticketing

  • Added some formatting variables to resolve issues with double spacing and extraordinarily long spacing in ticket paragraphs.

Network Sites

  • Network sites can now be set to Pending, which will display as yellow tower icons with their status in the Elevation Profile.
  • Disabled network sites will no longer display on the Elevation Profile.

MikroTik

  • MikroTik will now properly save Relay Address settings.
By |2018-09-27T15:58:28-05:002018 September 27th|Changelog|Comments Off on Release 18.09.27 [Beta]

Release 18.09.26 [Beta]

Equipment

  • Several adjustments to the equipment form to resolve issues with inputs not updating properly or saving as expected.
  • Device configuration files were showing duplicate results, they should now only show one.

Saisei

  • Modified some calculations to properly reflect flow data rates for Saisei graphs.
  • During sync, Powercode will now properly determine if a Partition has been disabled, and removes it from the rate plan if so.
  • You can no longer unselect the “Other” partition.
  • Any Equipment parents will now be added into Saisei as APs.
  • Added all Customer Portal Saisei graphs to the Customer Overview.

Customer Portal

  • Resolved an issue where disabling customer’s ability to delete their last payment method also unintentionally affected customer permissions.

MikroTik

  • SlowAfterTriggered will now correctly effect the its corresponding MikroTik queue.

Search

  • You can now search by ExternalAccountID in the Search Bar.

Elevation Profile

  • Disabled network sites will now show in the Elevation Profile and will be tagged ‘DISABLED’.
By |2018-09-27T15:58:54-05:002018 September 26th|Changelog|Comments Off on Release 18.09.26 [Beta]

Release 18.09.17 [Beta]

Customer

  • Security Questions label will no longer appear if set to 0 in the Add Customer Wizard.
  • Added a configuration option to enable or disable the telephone link attached to a Customer’s phone number.

Saisei

  • Customer Portal Application Rate graphs now refresh every 5 seconds automatically.
  • Resolved an issue with conflicting Saisei partitions.
  • A fringe case where some Saisei settings would not save has been resolved.
By |2018-09-17T13:46:47-05:002018 September 17th|Changelog|Comments Off on Release 18.09.17 [Beta]

Release 18.09.13 [Beta]

Unimus

  • New Unimus Integration.

Saisei

  • Powercode will now push 10gb to Saisei if the Rate is blank.
  • Changed sequence numbers on Saisei to update during sync.

Equipment

  • Filtering inventory search when adding or editing equipment now properly handles the “:”.

Payments

  • Fixed an alignment issue that was causing confusion when Entering a Payment.

API

  • The API now fully supports searching for Customers via a Phone Number.
By |2018-09-13T16:08:55-05:002018 September 13th|Changelog|Comments Off on Release 18.09.13 [Beta]

Release 18.09.10 [Beta]

Customer Portal

  • Security Questions will no longer display on the Customer Portal if there aren’t any.

Customer Overview

  • Updating a customer’s invoice preference will properly log to the Customer Event Log again.

Equipment

  • The ability to change Equipment ownership on edit has been re-added.
By |2018-09-10T16:52:13-05:002018 September 10th|Changelog|Comments Off on Release 18.09.10 [Beta]

Release 18.09.05 [Beta]

Equipment

  • Transferring equipment will no longer lock up when attempting to transfer to another customer.
  • We added a popup asking if you want to use a matching piece of inventory equipment when manually entering a MAC address.
  • Added filtering functionality to the Select from Inventory popup when editing or adding a piece of equipment.

Reports

  • Form 477 now has a system configuration option to enable or disable automatic FCC data generation and the FCC 477 Report.
  • Duplicate Ticket Dashboard reports have been removed, and the ticketing dashboard will resume displaying data as expected.

MikroTik

  • IPv6 information will no longer be lost when deleting an Address Range with MikroTik.
By |2018-09-05T13:10:13-05:002018 September 5th|Changelog|Comments Off on Release 18.09.05 [Beta]

Release 18.08.30 [Beta]

Customer Portal

  • One time overage charges will now display properly in the Customer Portal.
  • Payments in the portal will no longer in some cases show an inaccurate amount of $0 on the success page.

Saisei

  • Resolved several issues that were preventing Saisei from completing synchronization.
By |2018-09-05T11:46:11-05:002018 August 31st|Changelog|Comments Off on Release 18.08.30 [Beta]

Release 18.08.28 [Beta]

Upgrades

  • Updated the remote patch location, which will resolve issues seeing outdated or old patches.
  • When scheduling an upgrade, Beta customers may have experienced an issue where the upgrade would be scheduled immediately. This has been resolved, and upgrades will schedule and run at the correct time now.

Equipment

  • Updated the equipment form to properly show options when modifying a device configuration template file.
  • The inventory popup will now show pagination, to properly navigate through all available inventory items.
  • Inventory popup has been adjusted to scroll more easily, especially on lower-resolution screens.
  • Resolved a problem in which the IMSI wasn’t being set when editing a piece of equipment.
  • Custom Fields will now populate again on the Equipment form.

Saisei

  • Saisei BMUs should no longer unintentionally kick into an Out of Sync status.

MikroTik

  • MikroTik interfaces for mirrored BMUs will now save properly.

Customer Portal

  • Some Saisei-specific graphs weren’t matched correctly with their Customer Portal configuration settings, we’ve re-matched them to activate properly.

Services

  • Unselectable services will no longer show up when applying a one-time service or charge.

Services

  • Firefox CSV exports will now export with the correct name and extension type. No more ‘bin’ file downloads.
  • New Report Access Logging – we’ve added logging to reports to log web user access to those reports. Access logs can be found under Reports -> Report Access Logs.
  • Customer Logs Report ‘More Info’ has been enabled as a filterable column.
By |2018-08-29T10:00:49-05:002018 August 29th|Changelog|Comments Off on Release 18.08.28 [Beta]

Release 18.08.23 [Beta]

IPv6

  • Initial deployment and support of IPv6 for MikroTik within Powercode. Documentation will be released shortly.
  • New Equipment Form for tracking and handling IPv6.

MikroTik

  • Added the ability to set a custom total queue when PCQ is selected.
  • Non-service APs can now have leases.
  • You can now select total-queue for PCQ.

Billing

  • Removing a price override sometimes set the override incorrectly to $0. This has been fixed.
  • Deleting credit cards now shows the last 4 digits to verify the correct card is being deleted.
  • Setting grace periods was sometimes trying to reactivate customers twice, they will now only be reactivated once.
  • When billing with IPPay for the first time, an issue where check numbers could bounce back as invalid has been resolved.
  • Fixed various points in Invoices where foreign characters were not being encoded properly.

Reports

  • CSV exports for reports will now be named by their respective Report name. For example, the Active Customers report will now export as Active Customers.csv

Saisei

  • Application lists will now be pulled directly from powercode.com, to ensure it is always up to date.

Customer Portal

  • Equipment probes can be enabled through the Customer Portal configuration, and viewed directly on the Customer Portal.
  • Multiple customer portal graphs for Saisei have been fixed and will now display correctly.
  • New Default Login page allows you to configure which page you want customers to be redirect to when they log in.

Equipment

  • Port specifications will now be saved correctly.
  • SNMP OIDs will no longer save as the “Last Result”.

Search

  • You can now search for Equipment by EquipmentID and be directed to the equipment page if a match is found.
  • Added the ability to search by Transaction ID.
  • Added the ability to search by IMSI.
  • Added the ability to search by the last 4 digits of a Credit Card.

cnMaestro

  • There were some cases where data would display even if it didn’t exist, these have been resolved.

Customers

  • Added the ability to create and require security questions to be answered when creating a customer account.
  • When sending an email to an individual customer, the “From” address will now pull from the appropriate Multi Brand Company.

Twilio

  • We resolved an issue where some job variables were not populating when sending out a Twilio message.

Upgrades

  • Loading and saving available patches will now work as intended.

API

  • Customer Tax Zones will now properly be set when updating a customer through the API.
By |2018-08-23T18:24:40-05:002018 August 23rd|Changelog|Comments Off on Release 18.08.23 [Beta]

Release 18.08.06 [Beta]

Upgrades

  • New Powercode Patching system. Within Powercode on the Upgrade page, you can now install Patches that have been deployed by Powercode. New patches will appear once they become available, and will be able to be applied to your Powercode system with the click of a button.
    • With this feature, you will no longer have to wait for a release or even have to perform a full upgrade to your system just to get minor bugs fixed.  As soon as we fix and verify internally, they will become available to you.
  • New Powercode Upgrade page. The redesigned upgrade page now allows you to load current and most recent patch notes directly on the Upgrade page. In addition, you can now Reschedule and Cancel an upgrade that has been scheduled – allowing you maximum flexibility on when your upgrade occurs.

MikroTik

  • PCQ no longer attempts to set the rate to 0 incorrectly.
  • Removed non-limited Equipment from all queues and redirects.
By |2018-08-06T16:17:06-05:002018 August 6th|Changelog|Comments Off on Release 18.08.06 [Beta]
Go to Top